Installation, Use And Maintenance Of Precision Planetary Reducer

The correct installation, use and maintenance of the precision planetary reducer is an important part of ensuring the normal operation of mechanical equipment. Therefore, when installing the planetary reducer, please strictly follow the installation and use related matters below, and carefully assemble it.

 

Step 1: Confirm whether the motor and the reducer are intact, and check whether the dimensions of the parts connecting the motor and the reducer match.

Step 2: Unscrew the screw on the dust-proof hole on the outer side of the reducer flange, adjust the PCS system clamping ring to align the side hole with the dust-proof hole, and insert the inner hexagon to tighten. After that, remove the motor shaft key. Before installation, wipe the motor input shaft, positioning boss and the anti-rust oil at the connection part of the reducer with gasoline or zinc-sodium water.

Step 3: Connect the motor and the reducer naturally. When connecting, it is necessary to ensure that the concentricity of the output shaft of the reducer and the input shaft of the motor is the same, and the outer flanges of the two are parallel, which can prolong the service life and obtain the ideal transmission efficiency and lower noise. In addition, it is strictly forbidden to hit with a hammer during installation to prevent excessive axial or radial force from damaging the bearings or gears. Be sure to tighten the mounting bolts before tightening the tightening bolts.

Step 4: After the reducer is installed, it should be turned flexibly by hand without jamming. Before starting the machine, the connecting screws should be tightened, and the no-load test run should be no less than 2 hours. The operation should be smooth, without impact, vibration, noise and oil leakage. If found, it should be eliminated in time. During use, check whether the fasteners are loose or not to ensure normal operation.

CAMEL Global Supply is an industrial parts exporter, distributor and custom solutions supplier, especially rare and hard-to-find parts. Our core is various of reducers and machinery parts, such as: gear worm reducer, planetary reducer, geared motor, gearboxes, motor, excavator, loader, forklift and related parts, hydraulics, cutting tools,car and truck parts, engine parts, bearings, chains, mechanical transmission components and so on.
If you have any needs or questions about our products, you can contact us and we will reply in time.
sales@china-speed-reducer.com
https://www.china-speed-reducer.com

Leave a Comment

Your email address will not be published. Required fields are marked *