Application And Use Conditions Of Cycloid Gear Reducer
Overview
1) Single-stage transmission, the transmission ratio is generally 9-87
Model:B(X) W(L)D10-23-0.55
Note:
B(X) — B series cycloidal pinwheel reducer;
X series cycloidal pinwheel reducer .
W(L) — W is horizontal installation;
L is vertical installation.
D(B) —D is equipped with Y series ordinary motors;
B is equipped with YB series explosion-proof motors.
10 — The base model is 10.
23 —The reduction ratio is 23.
0.55 — The motor power is 0.55kw.
2) Two-stage transmission, the transmission ratio is generally 121-7569
Model:B(X) W(L)ED195-475-16
Note:
B(X) — B series cycloidal pinwheel reducer;
X series cycloidal pinwheel reducer .
W(L) — W is horizontal installation;
L is vertical installation.
E-E is a two-stage transmission.
D(B) —D is equipped with Y series ordinary motors;
B is equipped with YB series explosion-proof motors.
195 — The base model is 195.
475 —The reduction ratio is 475.
16 — The motor power is 16kw.
Application
Cycloidal pin gear reducer adopts the principle of cycloidal pin tooth meshing and planetary transmission, so it is usually called planetary cycloidal reducer. Planetary cycloidal pin gear reducer can be widely used in petroleum, environmental protection, chemical industry, cement, transportation , Textile, pharmacy, food, printing, lifting, mining, metallurgy, construction, power generation and other industries, as a driving or decelerating device, the machine is divided into horizontal, vertical, dual-shaft and direct-connected assembly methods. Its unique and stable structure can replace ordinary cylindrical gear reducers and worm gear reducers in many cases. Therefore, planetary cycloid reducers are widely used in various industries and fields and are generally welcomed by users.
Conditions of Use
1. Cycloidal pinwheel reducers are allowed to be used in continuous work situations, and allow both forward and reverse directions to run at the same time. Some models of cycloidal pinwheel reducers only allow one-way rotation.
2. The rated speed of the input shaft is 1500 rpm. When the input power is greater than 18.5 kW, it is recommended to use a 6-pole motor with 960 rpm.
3. The working positions of the horizontally installed cycloid reducer are all horizontal. The maximum horizontal inclination angle during installation is generally less than 15°. When it exceeds 15°, other measures should be taken to ensure adequate lubrication and prevent oil leakage.
4. The output shaft of the cycloid reducer cannot be subjected to large axial force and radial force, and other measures must be taken when there is a large axial force and radial force.
CAMEL is a professional supplier,distributor and manufacturer of speed reducers and related accesories. including gear reducers,rotary reducer,worm gearbox, servo-gearbox, planetary gearboxes,planetary gear reducer helical gear reducers,planetary gearbox,right angle gear reducer,gear reduction,gear motors, electrical motors,DC motors, DC gear motor,dc gearedmotors,AC gear motor,AC motors, servo motors,ac servo motor,dc servo motor,servomotor, bearings, gears,spur gear,helical gear,bevel gear,worm gear,planetary gear, couplings, oil seals, belts, chains, etc.If you have any need,please feel free to contact CAMEL:
sales@china-speed-reducer.com
https://www.china-speed-reducer.com