First, the speed can not be too low
If the engine speed is too low, it means that the speed is lower than the speed of the first speed when the vehicle speed is 10Km/h. When the speed is too low, the car has no inertia. When the engine drives the car, the pressure between the parts of the machine is very high. The speed is too low, the gasoline is not completely burned, and the engine is not fully powered.
Second, try to shorten the time of the idle hot car
Raising the oil temperature by idle speed is slower than driving the hot car while driving. The shorter the engine reaches the normal operating temperature, the less the engine wears, so the idle speed will extend the engine’s normal operating temperature. The longer the idle time, the more carbon is produced.
Third, use the manual mode when going up and down the steep slope
When the luck is bad, maybe our car will be blocked on a steep slope, stop and go. At this point, we should use the manual mode of the automated manual transmission to limit the gear to 1st gear to cope with frequent ramp starts. This operation is also a protection for the gearbox;
It is obviously much more comfortable to use the manual mode low gear downhill when driving down the steep slope or in the underground garage. At least we don’t need to frequently and step on the brakes for a long time, and it can also ensure driving safety and kill two birds with one stone.
worm gearbox supplier_NRV110 Worm Gear
We’re professional NRV110 worm gear manufacturers and suppliers in China, specialized in providing high quality customized products. We warmly welcome you to wholesale NRV110 worm gear at low price from our factory. Contact us for quotation.
Fourth, climb the slope to change the manual low gear
When the brake is not applied and the throttle is not applied, the car automatically crawls forward and the clutch is in a semi-coupling state. Due to the semi-coupling, the wear between the clutch plates can be severe.
5. Slow down before the flameout
Stop, shift to the parking stall, then pull the hand brake, turn off the fire, this process should not be too fast.
Sixth, accelerate the overtaking with manual mode
If the transmission needs to be in the high gear when overtaking, using the manual mode of the transmission to quickly downshift, the vehicle can speed up the speed with the high torque of the low gear and complete the overtaking action more quickly.
CAMEL Transmission Machinery Factory is a professional supplier,distributor and manufacturer of gear reducers and related accesories. including planetary gearbox,worm gearbox,rotary reducer,servo-gearbox,planetary gear reducer,helical gear reducers,planetary gearbox,right angle gear reducer, gear reduction,gear motors, electrical motors,DC motors, DC gear motor,dc gearedmotors,AC gear motor,AC motors, servo motors,servomotor, bearings, spur gear,helical gear,bevel gear,worm gear,planetary gear, couplings, oil seals, belts, chains, etc.If you have any need, please feel free to contact CAMEL:
Mob/Wechat/Whatsapp:8618015057952
