Author name: Ina

1．During the work, when the oil temperature exceeds 80℃ or the oil pool temperature exceeds 100℃ and abnormal noise is found, the use should be stopped in time, and the reason should be checked. The fault must be eliminated and the lubricating oil must be replaced before the operation can continue.  2.When changing oil, wait […]

When manipulating the shift lever, it is very laborious to lock the gear, and it cannot enter the gear smoothly; or the toothing sound occurs when the gear is locked, and the gear is not caught when it is serious. The reasons are as follows: (1) The clutch is not completely separated and the power

1. Manual gear Also known as MT, it is the earliest and most widely used. Since the birth of the car, it has been a manual gearbox, which has been used until now, which is enough to show that it has good reliability and stability. The structure is simple, and the shifting fork is controlled

1. The pressure difference between the inside and outside of the reducer: During the operation of the reducer, the friction of the motion pair is heated and affected by the ambient temperature, so that the temperature of the reducer rises. If there is no vent hole or the vent hole is blocked, the pressure inside

The main feature of the worm gear reducer is that it has a reverse self-locking function and can have a large reduction ratio. The input shaft and the output shaft are not on the same axis, nor on the same plane. However, the volume is generally large, the transmission efficiency is not high, and the

Due to the harsh operating environment of the reducer, there are often faults such as wear and leakage. The main ones are: 1. The bearing chamber of the reducer is worn, which in turn includes the wear of the bearing housing of the housing, the bearing chamber of the housing, and the bearing chamber of

(1) Change the transmission ratio, expand the range of variation of the drive wheel torque and speed to adapt to the constantly changing driving conditions, and at the same time make the engine work under favorable conditions of high power and low fuel consumption; (2) The vehicle can be driven backwards while the engine rotates

1. Improve the venting cap and inspection hole cover: The internal pressure of the reducer is greater than the external atmospheric pressure is one of the main reasons for oil leakage. If you try to balance the pressure inside and outside the machine, the oil leakage can be prevented. Although the reducer has a venting

The reducer is a mechanical transmission device in many fields of the national economy. The product categories involved in the industry include various types of gear reducers, planetary gear reducers and worm reducers, as well as various special transmission devices, such as speed increase devices and speed control. Devices, and various types of composite transmissions

Try to choose the approximate ideal reduction ratio: reduction ratio = servo motor speed / reducer output shaft speed. Torque calculation: For the life of the reducer, the torque calculation is very important, and pay attention to the maximum torque value (TP) of the acceleration, whether it exceeds the maximum load torque of the reducer.