How Many Do You Know About Terms Of Speed Reducers?

We will hear some terminology when buying a speed reducer. In order to let everyone understand the reducer more fully and better choose the appropriate reducer, so as not to buy the wrong one due to terminology problems.
Code: Many engineers will say that the reducer is a few yards and a few yards. In fact, this is the power, one yard is equal to 750W, two yards is equal to 1500… and so on.
Reduction ratio: Also called speed ratio, it is a very important parameter of the reducer. Its calculation method is: reduction ratio=input speed/output speed.
Number of stages: here refers to the number of gear stages of the reducer, divided into two, four, six, eight… The more poles, the slower the speed, but the higher the torque. The more commonly used is the 4-stage reducer, which corresponds to It is a 4-level motor.
Full load efficiency: Under full load, the transmission efficiency of the reducer is a very important parameter, which should be selected according to your own practical situation.
Working life: The accumulative working time of the reducer under the rated load and the rated input speed. Generally, if the quality of the reducer is not improperly used or used in the wrong environment, the service life is relatively long, such as the reducer of Pujiang Electromechanical Up to more than 10 years.
Rated torque: the torque for long-term operation allowed by the rated life. When the output speed is 100 rpm, the life of the reducer is the average life. When this value is exceeded, the average life of the reducer will be reduced. The reducer malfunctions when the output torque exceeds twice.
Noise: The unit is decibel dB (A). This value is measured when the input speed is 3000 rpm, without load, and a distance of 1 meter from the reducer.
Backlash: Fix the input end so that the output end rotates clockwise and counterclockwise. When the output end bears plus or minus 2% of the rated torque, the output end of the reducer will have a slight angular displacement. This angular displacement is the return clearance. Also called “backlash”. The unit is “minute”, which is 1/60 of a degree.
CAMEL is a professional supplier,distributor and manufacturer of speed reducers and related accesories. including gear reducers,rotary reducer,worm gearbox, servo-gearbox, planetary gearboxes,planetary gear reducer helical gear reducers,planetary gearbox,right angle gear reducer,gear reduction,gear motors, electrical motors,DC motors, DC gear motor,dc gearedmotors,AC gear motor,AC motors, servo motors,ac servo motor,dc servo motor,servomotor, bearings, gears,spur gear,helical gear,bevel gear,worm gear,planetary gear, couplings, oil seals, belts, chains, etc.If you have any need,please feel free to contact CAMEL:
sales@china-speed-reducer.com
https://www.china-speed-reducer.com