SH(TR) Three-Ring Reducers
Features:
1. Strong bearing capacity and long service life
2. High transmission ratio and dense classification, single stage 11-99, double stage 9801
3. Stable operation and low noise
4. Compact structure, small size and light weight
5. It is easy to assemble, disassemble and maintain. It is parallel to the shaft and easy to replace.
6. Wide applicability, can be made into horizontal, vertical, flange connection and combined transmission structure
description
Type, structural characteristics and basic parameters of three ring reducer | ||
type | structure characteristics | Specification, transmission ratio and output torque |
SH(TR) | Basic type, single-stage three ring drive, two high-speed parallel and symmetrical to low-speed shaft, box horizontal seat mounting, flat split | a=80~1070mm |
i=11~99 | ||
T2=0.124~469kN.m | ||
SHO(TRO) | One or two high-speed shafts are directly connected with the motor; the rest is the same as SH (TR) | a=105~300mm |
i=11~99 | ||
T2=0.259~10.52kN.m | ||
SHDK(TRDK) | The low-speed shaft system is hollow shaft with sleeve hole; the box has anti swing pin hole; the rest is the same as SHD (TRD) | a=125~300mm |
i=11~99 | ||
T2=0.435~10.52kN.m | ||
SHCⅠ(TRCⅠ) | Combined two-stage transmission; three ring drive with high-speed cylindrical gear on one or both sides; the same as SH (TR) | a=125~1350mm |
i=21.7~605 | ||
T2=0.435~932.42kN.m | ||
SHCⅡ(TRCⅡ) | Combined two-stage transmission; the high-speed cylindrical gear transmission is placed at the lower part of the box split surface; the rest is the same as SHC Ⅰ (TRC Ⅰ) | a=125~1350mm |
i=21.7~605 | ||
T2=0.435~932.42kN.m | ||
SHCD(TRCD) | Combined two-stage drive; one or two high-speed shafts are directly connected with the motor; the rest is the same as SHC I (TRC I) | a=125~450mm |
i=21.7~605 | ||
T2=0.435~35.9kN.m | ||
MSH(MTR) | For cement mill slow speed drive; high speed shaft is directly connected with motor; the rest is the same as SHCD (TRCD) | a=350~600mm |
i=100~605 | ||
T2=15.79~87.66kN.m | ||
SHS(TRS) | Two stage three ring drive; high speed stage is added to one side or both sides of low speed stage; the rest is the same as SH (TR) | a=215~1350mm |
i=299~9801 | ||
T2=3.336~938kN.m | ||
LLSH(LLTR) | Continuous casting steel straightener transmission; It is equivalent to two SHC Ⅱ (TRC Ⅱ) type double structure | a=300~500mm |
i=100~605 | ||
T2=10.52~48.01kN.m | ||
SHT(TRT) | Single stage three ring drive; two high speed parallel and located on the same side of low speed shaft; the rest is the same as SH (TR) | a=125~400mm |
i=11~99 | ||
T2=1.024~20.12kN.m | ||
QSH(QTR) | For crane; can be installed horizontally or vertically; same as SHT (TRT) | a=250~630mm |
i=12.5~100 | ||
T2=1.024~20.12kN.m | ||
QXSH(QXTR) | For crane; three point suspension support; the same as SHT (TRT) | a=250~630mm |
i=12.5~100 | ||
T2=1.024~20.12kN.m | ||
If you have product requirements, you can click the button below to learn more about our reducer products.
If you are interested in SH(TR) Three-Ring Reducers or have any questions, you can contact us and we will reply to you in time.